|
What are the full power requirements? Printed from: Neuros Forums Topic: Topic author: Ross
Subject: What are the full power requirements? I have a very specific project that I'd like to use the Recorder II for and would like to know the power usage before I order one. I saw on the specs AC voltage, but figure that this is an AC adapter, and not the unit itself. Any idea on the V*A=W? Volts, Amps and Watts in DC? Does it depend on the memory card? If so, then what is the AC adapter sized for?
Replies:
Reply author: Tsukai Assuming it's similar to the Recorder 1, then it works at 5VDC and draws less than an 1A. In otherwords, just about any NICAD, NIMH, alkaline, or gel cell pack can power it no problem for a few hours. I'd recommend a voltage regulator chip hooked in with the battery to be on the safe side.
Reply author: TARTZ Output on wall wart:
Reply author: JoeBorn I haven't actually tested this, but my guess is that power draw is probably about 3W or so when recording to microdrive. There is considerable discussion about power consumption in the context of charging via USB on the google groups discussion.
Reply author: cuplites Ross
Reply author: Ex-Navy Be careful using the neuros/microdrive with a helmet cam.
Reply author: MJM
quote: Ex-Navy, I'm interested in the system that powers the recorder with a standard 9V battery. Are you selling them? Thanks
Reply author: Ex-Navy Yes we are. www.olson-engineering.com quote: Ex-Navy Neuros Forums : http://www.neurosaudio.com/community/forum/ © Copyright ©2002-05 Neuros Technology International, LLC all rights reserved. |