Neuros Forums
Home | Active Topics | Search | FAQ
 All Forums
 Neuros MPEG-4
 Neuros MPEG-4 Recorder 2 Support
 Not a full screen

Note: You must be logged in order to post a reply.
If you are a registered user, click here to login.
Otherwise, click here to register.

T O P I C    R E V I E W
surfcity Posted - 02/23/2006 : 9:06:02 PM
When I record I get a thin black line on one or both
sides of the screen from where the picture ends
and the side of the screen. Picture and sound are
otherwise fine. I recorded a few movies before
this started to happen. Is it a setting?
Anyone run into this problem?

Thanks.
5   L A T E S T    R E P L I E S    (Newest First)
duke Neuros Posted - 03/03/2006 : 4:36:08 PM
Have you tried using a different cables?
surfcity Posted - 02/28/2006 : 09:53:19 AM
Same problem with black bar on right, left
or both sides of screen, Does the same thing
hooked up to the cable, vcr, dvd, etc.
surfcity Posted - 02/24/2006 : 10:24:45 PM

I'm recording from the cable box.
The cable goes from the cable box through the recorder
to the tv. I'm going to check the cables again.
Ex-Navy Posted - 02/24/2006 : 8:12:37 PM
I had the same problem only when recording from a VCR.
I moved the input video cable to the recorder a few times and it disappears.

Ex-Navy
cyberlord7 Posted - 02/24/2006 : 11:11:04 AM
What source are you recording? Television, VCR, something else?
I ran into something similar when I recorded my old Star Wars Betamax tape. I think it had more to do with the "tracking" adjustment than anything else.
If you are recording from a VCR I would suggest you look for the tracking control and see if you can eliminate the problem with that.

CyberLord_7

Neuros Forums Go To Top Of Page
Snitz Forums 2000