Remote Control Code

[Capt. Mouser]

Someone in the other forum asked if the ir code on the recorder2 is compatible with any existing codes in the back of the DishNetwork manual. It would DEFINITELY improve usability, by letting the dish receiver turn the R2 on and off for recording.

Please, can you respond to this, it wouldn't cost you guys anything.

Bud

[Ex-Navy]

Maybe these two items can help you out:

I think the R2 remote is a custom remote, uses a NEC protocol, 38 Khz Ir, custom code 866b. The remote decoder is made by Jaecs of Taiwan.  I could not find any additional info on their site.

I have posted a question about it here:

http://www.hifi-remote.com/forums/viewforum.php?f=20

and the button codes  of the R2 remote codes here:

 

[Ex-Navy]

Try the Universal Cable box remote code 0770
These brands should work:

Apache
Viewmaster VM3800

or try CBL code 1329 might work as well.

If not, you can buy a JP1 enabled remote called ONE for ALL (universal) and program the CBL button to be 0770 or 1329.
This will control your Neuros Recorder.

Good luck

[Capt. Mouser]

OK, your info is good, but what I want is for the SATELLITE RECEIVER IR BLAST to turn on the R2 to record like it does for my vcr. Does that make sense? I figgered that maybe one of the vcr or tv codes built into the satellite receiver.

Bud

[Ex-Navy]

For sure it makes complete sense what you are trying to do.

You are trying to get your Satellite box to get the R2 to start recording by programming  your Satellite IR Blaster
with an Ir code that the Neuros remote uses.

But what you are trying, and what maybe available, are two different things.

[Speedster]

Hello, this is my 1st post on this forum, hope I won't break any rule.
I'm also interested in MPEG-4 Recorder IR codes, 'cause I'm trying to control it via an "homebrew" IR-PIC device. I see that unfortunately the image posted by Ex-Navy with them is not available anymore. Please, could you post them back again? Or does anyone else have them?
Thanks in advance for your help,
Andrea