Primary Links

MPEG4 Recorder 2 | 2 Plus Firmware

Firmware Version 2.0.22

This version of firmware adds additional functionality to the Auto Record feature.
As long as the unit is set to Auto Record and is turned on, it will start recording when it detects an A/V signal and stop recording when it doesn't.
It will repeat this process every time as long as the unit is on and there is room on your storage card.

------------------NOTE: IF YOU ARE UPGRADING FROM A VERSION LOWER THAN 2.X.X-----------------
-----------------------------YOU WILL NEED TO INSTALL VERSION 2.0.12 FIRST!--------------------------

Upgrade instructions:

1. Check out which version of firmware you currently have on the Recorder
2. Go to the Setup Menu, click on the Enter Button on the remote and scroll down to the second page of the menu. If you already have version v2.0.22 on your unit, you do not need to upgrade the Recorder.
3. You should format the flash card you will use to upgrade the Recorder 2.
a. If you use a memory stick, format the card with the PSP.
b. If you use a CF card, format the card with the Recorder 2. Go to the Setup Menu, scroll down to Format Disk, click enter and when prompted if you want to format, highlight Yes and click on the Enter button on the remote.
4. Download the firmware file "VCR4800.bin". Cut and Paste the VCR4800.BIN file on your freshly formatted card (you will need a card reader if you don’t have a flash card slot on your PC).
5. Insert the card in the appropriate card slot of the Recorder 2.
6. You Recorder will have to be connected to your TV and powered on.
7. Use the Arrow on the remote to navigate the Menu on the top of your TV screen and highlight the Setup Menu. Click on the Enter button to enter this menu.
8. Highlight the Upgrade option using the remote. This is the last option at the bottom right of your screen and click on the Enter button.
9. When Prompted if you want to upgrade select Yes and click on the Enter button.
10. The upgrade will take one minute and the unit will shut itself off.
11. Power the unit on and check the firmware version as described in 1. You should now see v02.0.22

If you have any questions or problems, feel free to contact support@neurostechnology.com

Firmware Version 2.0.12

This version of firmware has many improvements over previous versions:
1. Fixed the issue that rendered recorded files unplayable on PSP firmware version 2.7
2. Fixed the issue of low volume playback of recorded video on PSP. The audio is now 30% louder.
3. Added recording options for smart phone , mobilephone and PDA . The new options are 176x120-15fps ; 320x240-15fps . The application of TCPMP with AAC plug-in is highly recommended to play the videos on smart phones and PDAs . The video format is .MP4.The video quality depends on the computing power of your smartphone and mobile phone.
4. Added the recording options for iPOD : 320x240 Fine(1024kbps) & Superfine (1536kbps) for superior video playback.

Upgrade instructions:
1. Check out which version of firmware you currently have on the Recorder 2. Go to the Setup Menu, click on the Enter Button on the remote and scroll down to the second page of the menu. (If you already have version v2.0.0012 on your unit, you do not need to upgrade the Recorder to this version).
2. You should format the flash card you will use to upgrade the Recorder 2.
a. If you use a memory stick, format the card with the PSP.
b. If you use a CF card, format the card with the Recorder 2. Go to the Setup Menu, scroll down to Format Disk, click enter and when prompted if you want to format, highlight Yes and click on the Enter button on the remote.
3. Download the NTSC or PAL version of the firmware zip file and unzip it. Cut and Paste the VCR4800.BIN file on your freshly formatted card (you will need a card reader if you don’t have a flash card slot on your PC).
4. Insert the card in the appropriate card slot of the Recorder 2.
5. You Recorder will have to be connected to your TV and powered on.
6. Use the Arrow on the remote to navigate the Menu on the top of your TV screen and highlight the Setup Menu. Click on the Enter button to enter this menu.
7. Highlight the Upgrade option using the remote. This is the last option at the bottom right of your screen and click on the Enter button.
8. When Prompted if you want to upgrade select Yes and click on the Enter button.
9. The upgrade will take one minute and the unit will shut itself off.
10. Power the unit on and check the firmware version as described in 1. You should now see v02.0.0012

If you have any questions or problems, feel free to contact support@neurostechnology.com