| Author |
 Topic  |
|
|
Sheki
Posting Profoundly
134 Posts |
 Posted - 10/08/2004 : 4:42:46 PM
|
I hope firmware 2.25 does not make it to production.
I've had problems with earlier versions, mainly during power-down, but with this release it happens more often than not.
I've had to repair bacd blocks and reformat the nand drive almost daily...
I can't specify exact steps, but it seems to happen when I disconnect from the computer, or when you try to shut off the unit. |
Your quick response to this post: (1 total votes)
I agree (100%)
I disagree (0%)
|
|
|
Gar Bage
Posting Profoundly
108 Posts |
Posted - 10/08/2004 : 4:48:33 PM
|
No problems detected here.
Could you be more specific, and/or try to find out a way to replicate?
-- Help put peace in the world. Buck Fush, Bill Kush. |
Your quick response to this post: (0 total votes)
I agree (0%)
I disagree (0%) |
 |
|
|
marvinspu36
Posting Profoundly
115 Posts |
Posted - 10/08/2004 : 9:03:07 PM
|
| I've been using 2.25 since it was released. I have not had any problems with it. |
Your quick response to this post: (0 total votes)
I agree (0%)
I disagree (0%) |
|
|
|
webkid
Posting Mania
1590 Posts |
Posted - 10/09/2004 : 2:40:49 PM
|
| Adding my "metoo". I've had no problems at all with 2.25/2.26. |
Your quick response to this post: (0 total votes)
I agree (0%)
I disagree (0%) |
|
|
|
brewer13210
Posting is for Closers
67 Posts |
Posted - 10/09/2004 : 6:03:42 PM
|
I had a similar problem with my Neuros I with firmware 2.25. It had appeared to lock-up after plugging in the USB cable, and after about five minutes, I finally unplugged it (while the 'do not unplug' warning was displayed), and afterwards it wouldn't shut down properly or detect when the USB cable had been plugged in again. Formatting the NAND memory fixed the problem.
Todd |
Your quick response to this post: (0 total votes)
I agree (0%)
I disagree (0%) |
|
|
|
webkid
Posting Mania
1590 Posts |
Posted - 10/09/2004 : 6:07:08 PM
|
quote:
Originally posted by brewer13210
I had a similar problem with my Neuros I with firmware 2.25.
Similar to what, exactly? Sheki didn't specify what issues s/he was actually having, only that they occured at shutdown and when unplugging. |
Your quick response to this post: (0 total votes)
I agree (0%)
I disagree (0%) |
|
|
| |
Topic |
|
firmware 2.25 problem...
Forum Locked
