| Author |
 Topic  |
|
|
dan.hayman(at)accomplishments.com
Likes to Post
21 Posts |
 Posted - 03/29/2005 : 11:53:27 PM
|
New unit & running Beta .28 due to the file manager function I like (even though its not yet ready for prime time per a previous post).
Anyway, I am trying to get NeuroCast to work. Have followed instructions to the letter and then have experimented a bit. No dice. the unit says that its playing an MP3 on 107.1MGZ, but it is not actually broadcasting. Do I have a defective unit? Also, I can not figure out how to manually set the broadcast freq. Instructions just do not seem to be clear, or I am missing something.
Help is appreciated.
Dan
Dan |
Your quick response to this post: (1 total votes)
I agree (100%)
I disagree (0%)
|
|
|
guttrhead(at)gmail.com
Posting Mania
402 Posts |
Posted - 03/30/2005 : 07:52:47 AM
|
| you can change the brodcast freq the same way you would change the volume if you were listening through headphones (up/down on the joystick). try finding a station with no other signal to see if its working right. 107.1 probably has too much other crap on it to get the neuros signal in. |
Your quick response to this post: (2 total votes)
I agree (100%)
I disagree (0%) |
 |
|
|
mattmcmanus(at)comcast.net
Just Posting
6 Posts |
Posted - 04/05/2005 : 9:29:18 PM
|
I have the same problem. I have a brand new unit as well. It also tries to broadcast to 107.1FM with no avail. Until now i was just attributing it to me being in center city philadelphia. I just figured all the available stations are saturated and that ones that arent have bleed over from other channels.
www.ablegray.com |
Your quick response to this post: (0 total votes)
I agree (0%)
I disagree (0%) |
|
|
|
peterskm
Posting is for Closers
92 Posts |
Posted - 04/13/2005 : 4:41:36 PM
|
I am in the King of Prussia area and 91.3 works good for me.
Procrastination is the key to flexibility. |
Your quick response to this post: (0 total votes)
I agree (0%)
I disagree (0%) |
|
|
|
teking66(at)cableone.net
Just Posting
3 Posts |
Posted - 05/11/2005 : 6:49:21 PM
|
When I first use the Autoscan option mine came up with 107.1 as well. I went thru the FM band and found a clear frequency. Then set my Neuros to that frequency, which is 104.3, and everything works great. I have found that the higher up in the FM band the better. I first tried a clear frequency at the bottom of the band and was getting alot of static, but that changed when I went higher in the FM band. The main this is to find a clear frequncy and use it. 107.1 just happened to be occupied by a station here. Hope this helps.
PS - guttrhead is right in what he says about setting the frequency manually. My manual says to do the same thing and it works.
Timothy E. King |
Your quick response to this post: (0 total votes)
I agree (0%)
I disagree (0%) |
|
|
|
ClusterOne
Posting is for Closers
75 Posts |
Posted - 05/11/2005 : 7:41:10 PM
|
quote:
Originally posted by peterskm
I am in the King of Prussia area and 91.3 works good for me.
Procrastination is the key to flexibility.
Hey, I live in the KOP area too! Never seen another Neuros other than my own :) Hoep to bump into ya sometime at the mall, haha.
here I is. |
Your quick response to this post: (0 total votes)
I agree (0%)
I disagree (0%) |
|
|
|
sez
Posting is for Closers
74 Posts |
Posted - 05/26/2005 : 1:14:15 PM
|
Wow; same thing!! I just got my Neuros II (after being the proud owner of a Neuros I for three years until the hard drive crashed) and the autoscan also ended up at 107.1, but no broadcast.
I'm a half hour on the Jersey side of Philly and used to use my Neuros I at 99.7, I believe. Maybe I'll try that in the car on the way home from work today.
Is there something about the 107.1 frequency that prevents it from working? |
Your quick response to this post: (0 total votes)
I agree (0%)
I disagree (0%) |
|
|
|
quibuski(at)yahoo.com
Just Posting
7 Posts |
Posted - 06/01/2005 : 4:23:48 PM
|
quote:
Originally posted by sez
Is there something about the 107.1 frequency that prevents it from working?
I think that's just the upper limit of the autoscan, and it stops there if it doesn't find an "empty" frequency. I got the same thing (107.1 had some distant-but-audible station on it), but I just hand-tune it to a suitable frequency now. I also have to pick new frequencies when driving around the state in my car listening, but I can generally find an empty one on the car's radio, then just use the up/down joystick on the Neuros to change its frequency to the one I found, and it all works great. |
Your quick response to this post: (0 total votes)
I agree (0%)
I disagree (0%) |
|
|
| |
Topic |
|
NeuroCast
Forum Locked
