| Author |
 Topic  |
|
|
Ex-Navy
Posting Profoundly
208 Posts |
 Posted - 05/30/2006 : 09:50:19 AM
|
Hey folks, it took alot of ingenuity, but we designed and completed
a PIC microcontroller circuit to replace the NR2 remote and provide
an Auto record function.
Bazamataz (user nic) designed and printed the PIC circuit in England.
What this means:
We have built a prototype box where the PIC circuit LED is in front of the receiving IR demodulator.
With the flick of a switch, the NR2 powers up, goes to its splash
screen, to the menu, then to auto record.
If video is present at the time of switching on, the NR2 goes directly to record mode.
Switching off the switch powers the NR2 off. Switching it on again,
it goes directly to auto recording without the Auto record feature
enabled. (in the NR2 menu)
The whole cct runs off of 12Vdc. Included is an onboard 5 volt regulator to power the NR2. The NR2 power cable is with our cct.
Just plug in 12VDC to the box, power it up and the NR2 records.
Replacing the switch with a motion sensor makes any NR2 a security
recording device.
A color bullet camera can easily be added. We are looking at providing the box with a video connector and camera power all in one
source.
A movie, using the NR2 as the source, is available on our site at
www.olson-engineering.com under products. Bazamataz kindly provided
this little movie as a demo only. The box used in the movie is not
the final one. Just a prototype to show its use.
A full system, complete with a helmet cam (bullet cam) will be
tested in the next few days. The test vehicle will be a Kawasaki
Ninja, travelling at about 200 km/hr.
We thank Johan at Neuros for his support in helping us with this
project. The guys at Neuros rock!
Ex-Navy |
Edited by - Ex-Navy on 06/02/2006 4:01:44 PM
|
Your quick response to this post: (0 total votes)
I agree (0%)
I disagree (0%)
|
|
|
claydubois(at)bellsouth.net
Likes to Post
12 Posts |
Posted - 05/30/2006 : 12:40:11 PM
|
| hehe ex-navy, sounds like we both took the same paths in trying to eliminate the remote. After our last series of discussions on the remote protocol, I was able to take the ATMEGA8535 Avr micro, and emulate the IR protocol using the Holtek encoder datasheet as a guide. I have not finished the entire system yet, but I just used the STK500 development board to test out the different remote signals. Next is to do include my PIR circuit and battery control to do a standalone video recorder similar to what you mentioned. My only complaint is that I wish the recorder would power up and start recording a bit faster. Right now, it takes about 4 seconds from power up to recording. Sure would be nice if Neuros had a way to speed this up. This is especially important when using it as a surveillance recorder as I plan on doing. Anyway, nice work you have done, a lot of people will be interested in that easy setup you have! |
Your quick response to this post: (1 total votes)
I agree (100%)
I disagree (0%) |
 |
|
|
Ex-Navy
Posting Profoundly
208 Posts |
Posted - 05/30/2006 : 2:47:06 PM
|
Thanks Clay,
The folks at Neuros do an incredible job to make us all happy with
our little annoyances, problems, etc.
They are very good at what they do. Look at the competition, not an
opensource word from them.
I think this open source forum is brilliant! I have been in
engineering technology for over 20 years and am glad to be a part of
this.
Any help that I can do for you, please ask!
A cool product, cool users, who all want to have fun with multimedia.
quote:
Originally posted by claydubois(at)bellsouth.net
hehe ex-navy, sounds like we both took the same paths in trying to eliminate the remote. After our last series of discussions on the remote protocol, I was able to take the ATMEGA8535 Avr micro, and emulate the IR protocol using the Holtek encoder datasheet as a guide. I have not finished the entire system yet, but I just used the STK500 development board to test out the different remote signals. Next is to do include my PIR circuit and battery control to do a standalone video recorder similar to what you mentioned. My only complaint is that I wish the recorder would power up and start recording a bit faster. Right now, it takes about 4 seconds from power up to recording. Sure would be nice if Neuros had a way to speed this up. This is especially important when using it as a surveillance recorder as I plan on doing. Anyway, nice work you have done, a lot of people will be interested in that easy setup you have!
Ex-Navy |
Your quick response to this post: (3 total votes)
I agree (0%)
I disagree (100%) |
|
|
|
eyeteeth
Just Posting
5 Posts |
Posted - 06/06/2006 : 09:50:09 AM
|
I've been trying to figure out how to use the unit with my kart racing. Can I be another tester? lol. (Really that serious) I've used a little device with an LCD in the past, but have been trying to figure out how to use the Neuros unit AND make it simple as I'm usually sitting on the grid when I want to start recording.
old device...
http://www.youtube.com/user/eyeteeth
The video looks much better, you tube messed it up.
I will anxiously be waiting for information on this. |
Your quick response to this post: (0 total votes)
I agree (0%)
I disagree (0%) |
|
|
|
Ex-Navy
Posting Profoundly
208 Posts |
Posted - 06/06/2006 : 8:06:11 PM
|
Eyeteeth,
Where are you located?
When we get the boards produced it will be easy to slide your NR2
into it, connect the cables and click the start button.
It will be easy as that.
Send me an email with your info. We will put you on the list.
Ex-Navy |
Your quick response to this post: (0 total votes)
I agree (0%)
I disagree (0%) |
|
|
|
gadget_geek
Just Posting
2 Posts |
Posted - 06/07/2006 : 12:36:56 PM
|
Can you send me information about this?
I use my recorder to race and this sounds like the ideal little
device.
|
Your quick response to this post: (0 total votes)
I agree (0%)
I disagree (0%) |
|
|
|
eyeteeth
Just Posting
5 Posts |
Posted - 06/09/2006 : 09:14:22 AM
|
I sent an e-mail off the contact page from your website. I'm located in southwest Michigan.
eyeteeth at comcast dot net
in case you can't find my other e-mail... which was sent from my work account.
I like the other unit... video quality is decent... fairly easy to use... and it has a little built in LCD screen, but it records to .asf and it's a real pain in the but to do anything with the files after they are recorded. Especially being mostly a Mac guy.
Thanks, and please keep me informed. How big is the box? Size is important... thanks. |
Your quick response to this post: (0 total votes)
I agree (0%)
I disagree (0%) |
|
|
|
Ex-Navy
Posting Profoundly
208 Posts |
Posted - 06/09/2006 : 10:10:31 PM
|
Thanks eyeteeth,
Your input is important to us.
The box will only be slightly larger then the NR2. Very compact.
The first couple units we may ask for ppl to test for us, give us feedback.
Are you interested?
quote:
Originally posted by eyeteeth
I sent an e-mail off the contact page from your website. I'm located in southwest Michigan.
eyeteeth at comcast dot net
in case you can't find my other e-mail... which was sent from my work account.
I like the other unit... video quality is decent... fairly easy to use... and it has a little built in LCD screen, but it records to .asf and it's a real pain in the but to do anything with the files after they are recorded. Especially being mostly a Mac guy.
Thanks, and please keep me informed. How big is the box? Size is important... thanks.
Ex-Navy |
Your quick response to this post: (0 total votes)
I agree (0%)
I disagree (0%) |
|
|
|
eyeteeth
Just Posting
5 Posts |
Posted - 06/27/2006 : 09:47:41 AM
|
Of course. I'm very interested. I, like many others, purchased the unit for auto record abilities which as of yet, really don't exist as thought. I've been hoping the feature would be fixed, but thus far, have not been able to use the unit due to the bug.
When you're ready, just let me know. I get to the track pretty close to once a week. I'll have to frequent these forums a bit more often to stay in touch.
Thanks. |
Your quick response to this post: (0 total votes)
I agree (0%)
I disagree (0%) |
|
|
|
Ex-Navy
Posting Profoundly
208 Posts |
Posted - 06/27/2006 : 4:30:25 PM
|
Thanks Eyeteeth,
The folks at Neuros are doing a fabulous job.
Like many users, the "add ons" for the NR2 (remote circuit) were fostered out of ideas on how to use the NR2 beyond the 115 volt outlet.
Barry, my counterpart in the UK is the genius behind the remote
protocol. Just like this great idea of open source, we like to share
our ideas with other users.
We all have expertise in some field.
We like to create "add ons", things like helmet cams, battery packs, a remote cct (lance remote)and a universal 5V portable power adaptor.
This adaptor will allow anyone to hook up any battery type to the
NR2 or 442. It will accept 4V-35Vdc. We should have it ready very
soon.
We will keep you updated Eyeteeth!
quote:
Originally posted by eyeteeth
Of course. I'm very interested. I, like many others, purchased the unit for auto record abilities which as of yet, really don't exist as thought. I've been hoping the feature would be fixed, but thus far, have not been able to use the unit due to the bug.
When you're ready, just let me know. I get to the track pretty close to once a week. I'll have to frequent these forums a bit more often to stay in touch.
Thanks.
Ex-Navy |
Your quick response to this post: (0 total votes)
I agree (0%)
I disagree (0%) |
|
|
|
mxracer95
Just Posting
3 Posts |
Posted - 07/12/2006 : 03:01:08 AM
|
Well I think I stumbled into the right thread.
I purchased my NR2 a few months ago because I want a permanent video recorder on my Yamaha R1. What I hope to eventually achieve is to turn on the bike, and have video record automatically with no user intervention. I also want it to loop record, so once the media is full, it begins to over-write existing data. So I never have to touch the unit unless I need recent video.
For example, I want video the next time I crash into a car that pulls out in front of me as evidence of who is at fault. Or the next time I get a ticket for driving on the shoulder I can have video evidence that I wasn't on the shoulder.
This auto record circuit is a big step toward that goal. If you're looking for testers, I'd be happy to help. |
Your quick response to this post: (0 total votes)
I agree (0%)
I disagree (0%) |
|
|
|
Ex-Navy
Posting Profoundly
208 Posts |
Posted - 07/12/2006 : 08:57:17 AM
|
Hi MXracer95,
This is the same thing I wanted too. I had my car trunk broken into.
I lost $12,000 worth of test equip, laptop, etc.
The R2 is so small, records very good, I thought, why not make it
portable, make it record automatically by the press of a switch or
a motion sensor.
I have a small colour bullet cam with audio that takes have decent
video and audio.
I have gotten alot of emails about this, Bazamataz (user) is
co-developing a final product with us to introduce to users like
yourself.
We have Paddy, a motorcycle police officer in Australia interested
for his personal safety too.
The loop recording will be the next step in our endevours.
We will keep you up to date as to the progress.
quote:
Originally posted by mxracer95
Well I think I stumbled into the right thread.
I purchased my NR2 a few months ago because I want a permanent video recorder on my Yamaha R1. What I hope to eventually achieve is to turn on the bike, and have video record automatically with no user intervention. I also want it to loop record, so once the media is full, it begins to over-write existing data. So I never have to touch the unit unless I need recent video.
For example, I want video the next time I crash into a car that pulls out in front of me as evidence of who is at fault. Or the next time I get a ticket for driving on the shoulder I can have video evidence that I wasn't on the shoulder.
This auto record circuit is a big step toward that goal. If you're looking for testers, I'd be happy to help.
Ex-Navy |
Your quick response to this post: (0 total votes)
I agree (0%)
I disagree (0%) |
|
|
|
algy
Just Posting
1 Posts |
Posted - 07/17/2006 : 12:21:25 PM
|
Hi
Looks very promising.
I am planing to use the Neuros in a model aircraft, the video will come from an on-board Sony CCD board camera.
1. Any idea when the auto-start unit will be available?
2. Approximate cost?
3. Weight? important in model aircraft. Would it be possible to remove the Nanos from it's case, and use the 'bare board'.
I realise, of course that this would invalidate the guarantee.
Cheers |
Your quick response to this post: (0 total votes)
I agree (0%)
I disagree (0%) |
|
|
|
Ex-Navy
Posting Profoundly
208 Posts |
Posted - 07/17/2006 : 4:48:55 PM
|
The final design of the printed circuit card is finished and sent
to a manufacturer for quotes/production.
The circuit has to be enclosed in a box of some type to all our LED
to be placed in front of the R2 IR demodulator. We designed a
complete acrylic blue box that will enclose the entire R2 and the cct
You can see the CAD drawing at www.olson-engineering.com
The box design has also gone out for quotes last week.
We will know more about pricing once the two quotes come back.
quote:
Originally posted by algy
Hi
Looks very promising.
I am planing to use the Neuros in a model aircraft, the video will come from an on-board Sony CCD board camera.
1. Any idea when the auto-start unit will be available?
2. Approximate cost?
3. Weight? important in model aircraft. Would it be possible to remove the Nanos from it's case, and use the 'bare board'.
I realise, of course that this would invalidate the guarantee.
Cheers
Ex-Navy |
Your quick response to this post: (0 total votes)
I agree (0%)
I disagree (0%) |
|
|
|
fastrider
Just Posting
1 Posts |
Posted - 07/20/2006 : 08:38:24 AM
|
| Any chance you could 'share' the pic source code & circuit design with the rest of us so we can make our own? |
Your quick response to this post: (0 total votes)
I agree (0%)
I disagree (0%) |
|
|
|
Ex-Navy
Posting Profoundly
208 Posts |
Posted - 07/20/2006 : 9:55:13 PM
|
The pics and information regarding kits, pcbs, schematics, where to buy parts, etc will be available shortly.
We have to verify proper operation before releasing the details.
quote:
Originally posted by fastrider
Any chance you could 'share' the pic source code & circuit design with the rest of us so we can make our own?
Ex-Navy |
Your quick response to this post: (0 total votes)
I agree (0%)
I disagree (0%) |
|
|
|
Press_Snapper
Just Posting
1 Posts |
Posted - 07/24/2006 : 12:30:16 PM
|
Hi guys, I run a UK based press agency, with do load of covert video work, for newspapers and TV. If any one produces the Neuros with the auto sensing input to stop/start recording, please give me a shout , I would be interested in buying some
Press Snapper |
Your quick response to this post: (0 total votes)
I agree (0%)
I disagree (0%) |
|
|
|
Ex-Navy
Posting Profoundly
208 Posts |
Posted - 08/02/2006 : 08:57:13 AM
|
Barry has completed the prototype version of the IR circuit. PCB's
have been finalized and will go out for testing.
The circuit draws only 5 micro amps in sleep mode until it awakened
by the "on record" switch.
Once turned on, the unit automatically goes to record and remains in
record mode until switched off.
More info to follow in the next week.
Ex-Navy |
Your quick response to this post: (0 total votes)
I agree (0%)
I disagree (0%) |
|
|
|
Ex-Navy
Posting Profoundly
208 Posts |
|
|
Mongrello
Just Posting
2 Posts |
Posted - 08/16/2006 : 09:33:24 AM
|
I just wrote a topic but maybe it was better to post it here.. sorry!
..first of all thanks for such disposable advice which i find so useful.
Could you please help me to understand something?
- does the device comes with a kind of plastic box to allocate the circuit?
- does it come with a cable+button to switch recording on and off (as shown on the video example) or do i need to find out a button and a way to connect it to your circuit?
- how can i connect it to my neuros?
- there's written that it offers a 12v-5v output. I reckon i can connect to it my bullet cam and my neuros, is it right?
where does it take the power then? 12v input?
- last... is it possible to order from italy? how much would it be?
thank you so much for your availability and help and sorry for the several questions!!! |
Your quick response to this post: (0 total votes)
I agree (0%)
I disagree (0%) |
|
|
| |
Topic |
|
Auto record circuit for the recorder
Forum Locked
