|
Title: MS Duo slot physical connection problem Post by: birdsquared on April 09, 2006, 07:49:20 PM I have a Sony 1GB MS Pro Duo card that works great, when it is recognized. The problem is that I often have to pull out and insert the card anywhere from 2 to 5 or more times before the M4R2 recognizes it. Is there anything I can do to increase the likelihood of a good physical connection?
Thanks, Jay Title: Re: MS Duo slot physical connection problem Post by: duke Neuros on April 10, 2006, 04:56:50 PM Try cleaning the MS DUO card contacts with a q-tip. Sometimes media storage cards can pick up dirt and debris on the connection contact points.
Also, try to wiggle the card to see if there is a loose connection. Title: Re: MS Duo slot physical connection problem Post by: birdsquared on April 12, 2006, 02:02:05 AM Huh - never had that problem with other storage cards, but wiping the contacts seemed to do the trick. Thanks.
Title: Re: MS Duo slot physical connection problem Post by: birdsquared on April 15, 2006, 05:24:21 PM Hmmm - spoke (wrote) too soon. Simply turning the device off and then back on can sometimes make the card unrecognizable. Then I have to do the pull push again until it is recognized. There is definitely something beyond dust on the card that is at play here. Any other suggestions?
Title: Re: MS Duo slot physical connection problem Post by: North on April 18, 2006, 06:13:36 AM The SONY MS DUO up 1GB R/W speed was slowly then SanDisk all type..
So,that's a MS card respond speed question.. I think that some 1GB up SONY MS DUO was cost-down version for PSP market!! North |