Neuros Technology Forums

Neuros MPEG-4 Recorder => Neuros MPEG4 Recorder - Feedback & Discussion => Topic started by: wick on August 25, 2006, 10:17:05 AM



Title: image/description of input ports
Post by: wick on August 25, 2006, 10:17:05 AM
I've spend about 30 minutes on your site and still haven't found either an image or a description of all of the inputs on this unit.  Could you please tell me what option are on this unit?  Composite (RCA), S-Video?

Thanks


Title: Re: image/description of input ports
Post by: AlphaBob on August 25, 2006, 10:38:48 AM
The input and output are both composit signals (left/right/video).  The physical connectors are 1/8 inch mini jacks to connect to supplied cables for both the input and output.

If you are using this for a iPod or PSP, the quality is more than acceptable.  I get about 2 hours for each 0.9 GB of storage.


Title: Re: image/description of input ports
Post by: wick on August 25, 2006, 10:48:03 AM
Thanks!

Hopefully, someone over there will include this info/image in the specs page.


Title: Re: image/description of input ports
Post by: dongle on August 25, 2006, 12:18:17 PM
Hi,

If you have scart connections:

The lead with SCART connector marked Video IN connects to the Video OUT port on the recorder:

4 pole connector - from body to tip
Body - Red conductor - scart pin 2 - audio right
Next - GND - scart pin 4
Next - Yellow - scart pin 20 - video
Tip  - White - scart pin 6 - audio left

SCART connector marked Video OUT connects to the Video IN port on the recorder:

4 pole connector - from body to tip
Body - Red conductor - scart pin 1 - audio right
Next - GND - scart pin 4
Next - Yellow - scart pin 19 - video
Tip  - White - scart pin 3 - audio left

Cheers

Pat