Neuros Technology Forums

Either it does not work all the time or it lags a few seconds before it starts.
                           ------ About the timed recording,it is a known issue,you can see the detailed information in bugzilla:http://bugzilla.neurosaudio.com/show_bug.cgi?id=693

What about an option to beable to remove the semi-trasparant screen and the Time on the monitor.
                         ------Do you mean that you want to goto the pass thru mode,if yes,hold  BACK key,then it will goto the pass thru.

Why after 10 seconds does the units screen go blank I find I that if I go to the application screen it will stay active. Is there a reason this needs to shut off?
                                 -----can you describe this issue more detailed,I don't konw how to duplicated.

Thanks

Kelly

Oh,thank you very much for your information.
I have reported the issue to the bugzilla,if any other questions,welcome to report to bugzilla.

http://bugzilla.neurosaudio.com/show_bug.cgi?id=609

 Can't record  more than about 15 mins in MP4 mode
                                                            ----This is  a known issue in3.26-0.34.You can see the detailed information on :http://bugzilla.neurosaudio.com/show_bug.cgi?id=614

looking thru bugzillia  I can't always tell what firmware version the posted bugs apply to
                                        Sorry to puzzle with you,add the new version to bugzilla will be in time from now on.Bugzilla is the main page that list the current known issue.

Also you can see the release note in WIKI,it included the new and known issue about the new release.you can see it on:
http://open.neurostechnology.com/taxonomy/term/28

Bob,
Playback the recorded ASF and MP4 file,is the MP4 file  more severe than ASF fiel?
OSD's input is PAL or NTSC?
Epcept the JUMP,there are any other problem?such as A/V out of sync?
do you use other cards to record?

I set the DVD's input as PAL,then record video,Resolution as 512 *400,then when recording,the video picture is jumping,playback is also jumping.But if set as NTSC,it is ok.

Thank you for your feedback.

playback controls (pause, fast forward) on remote did *not* work
                                           ----Does remote control work if you press other keys? I think it's because the SD's issue,you can use CF card to record then playback,the Pause and fast forward key can work.

don't know how to get the on screen menu off the screen when I want.
                                          ----Goto OSD main menu,then Hold BACK and LEFT key,it will get the screen menu off.

Do you set the Target Device as Apple iPod  or Sony PSP?If you set the Target Device as Apple iPod  or Sony PSP,although ou choose the correct Recording Path,OSD still can't find the recording path.
So if you want to use Multi-cards to record video or audio,you should set the Target Device as Unknown.
Can you try this to see whether it can record ?


Thanks and regards

Martin.
You can goto the Setting->Video Playmode ,
set the Repeat Mode as Single,then it will loop play one video over and over,
set the Repeat Mode as ALL,then it will loop play all video in current folder over and over.

Also if I encode a file to mpeg2 using a variable bit rate( lets say up to 8bps) can osd play this?
                                                                                       -----It can be played on OSD.

There are problems if playback mpg files at present( 3.26-0.29),the problem is same as your description. It's not relevant with using USB or SD cars.
This problem will be fixed later.

There are folder named 101mnv01 in your PSP?
Because Sony PSP still are improved now,if there are not 101mnv01 in your PSP,It will can't find the path to record.So if you want to record video to your PSP,please create 101mnv01 in mp_root in your PSP,
then select "Sony PSP" in "Target Device",
Start recording with "Recording Path = /media/usbdisk1",
or select /media/usbdisk1/mp_root/101mnv01".
to see whether it can work.

You can try this:
Go back to the OSD main menu page,then Hold Left key,you can back to the TV.

Record MP4 files,the longest recording length is only about 14 minutes.This is a known issuse.So if you want to record for long time,you can choose record ASF file format.

Thank you for your notice,I also test the Framrate and Bitrate,i find that this problem only happen when record MP4 files.I log it to bugzilla: http://bugzilla.neurosaudio.com/show_bug.cgi?id=800. if you have more information about it.you can add to bugzilla.
Thanks.

Do you change the parameter in Network Setting?If you havn't change the parameter,OSD will use static ip(192.168.1.100).But if you want to use DHCP,first,you should plug in network cable,then boot up OSD,lastly change the IP Addr Type as DHCP,network will work.
 

It's not a recording questions.It's  PAL and NTSC issue.Do you check the tv's video standards is PAL or NTSC,and DVD's video standards  is PAL or NTSC? you should set the signal in and out as  same video standands.  Also you should set :Setting-->General--->TV Output as same video standands. After set the three as same,then reboot OSD,your question will be fixed.

 Chris,do you record AVI files ? If you record AVI files,the out-of-sync issue while playing the record AVI files is still a problem in OSD version 3.21-0.21,you can see the detail information on : http://bugzilla.neurostechnology.com/show_bug.cgi?id=609