Neuros Firmware v1.45

Version 1.45 contains the following updates to the Neuros firmware:
1. Supports WMA playback, without DRM;
2. Supports Ogg Vorbis playback;
3. Supports WAV playback and record, WAV recording has three sample rate options: 8kHz, 44.1kHz and 48kHz;
4. Increased 2.0 lowbattery threshold from 3.4V to 3.5V.
5. Changed "bkpk.txt" to "bkpk.sn" to work with both NSM1.35 and NSM1.38.
6. Fixed random false USB detection bug.
7. Fixed DRMed WMA lockup due to a buffer boundary overflow. DRM is not supported yet.
8. Disabled HiSi gain control GUI;
9. Reduced constant memory usage;
10. Equalizer available, fixed 1.40's equalizer bug.
11. Fixed the bug that causes MyFi fail to start, this bug appears on version2.0 backpack;
12. Fixed file system bug that file system failed to check volume entry, it would cause system crash, this bug appears on version2.0 backpack;
13. Fixed the bug that causes database fail to be cached when using more than two players on one same backpack.

To update your firmware, download the file woid_0145.zip and unzip the contents to your PC, remembering where you placed the files. Then follow these instructions:
1) If you have Neuros Sync Manager set to synchronize automatically when you connect your Neuros make sure you disable this setting before you continue with this process (or NSM will try to start synchronization when you hit step 5). You can disable this setting in NSM in the Tools-Options under the Syncrhonize tab.
2) Shut down Neuros properly by holding PLAY button.
3) Unplug the Neuros power cord.
4) Press PLAY and DOWN simultaneously to start the Neuros and bring up the bootloader.
5) Follow the screen to connect USB cable.
6) Go to your PC and bring up Windows Explorer.
7) Find the Neuros removable disk and copy the "firmware" directory onto device, indicating to overwrite any files if they are already there.
8) Wait until the message "USB IDLE" appears.
9) Unplug the Neuros from the USB cable and follow the screen instructions to update firmware.