Static IP address

[scracha]

Downloaded latest beta firmware but for some reason it's not letting me change the DNS server.  Static IP address, gateway etc all fine.  Anyone else experienced similar issues?

[greyback]

Yes actually, you're right. Changes to the DNS line is not being saved in 1.41. I've logged this as a bug:
http://bugzilla.neurostechnology.com/show_bug.cgi?id=2509
If you find any other bugs like this, please don't hesitate to add them to Bugzilla.
Thank you!
-G

[sean weng]

Hi greyback, I double check on 1.41
- Original is DHCP and get the right IP with net-cable plugged-in
- Change to Static IP, change the IP and DNS number or only DNS number
- Save
- Enter Network again, all change has been saved
- Reboot OSD, review the network again, static settings parameter saved too
Another operation:
- Pull off the net-cable
- Restore network settings
- Change to Static IP and change the IP and DNS number
- Save
- Review again, all change has been saved
I can't reproduce.

[greyback]

Hi greyback, I double check on 1.41
- Original is DHCP and get the right IP with net-cable plugged-in
- Change to Static IP, change the IP and DNS number or only DNS number
- Save
- Enter Network again, all change has been saved

For us, the DNS setting is not being saved.

I've an idea as to why, perhaps our /mnt/OSD/resolv.conf file is not writable for some reason? I'll do a little investigation this evening. I'll also see if I can reproduce it with 1.44.
-G