Neuros Technology Forums

I guess your firmware is old version, please update to new version downloaded from http://open.neurostechnology.com/taxonomy/term/28

And neuros is fixed iPod issue.

roleeper,

Someone updated to 3.25-0.27 and solved rebooting issue.
Could you please capture the complete OSD  terminal information to me. Maybe I can know what is issue from terminal information. You can get me by sweng at neuros dot com dot cn.  Thanks.

Hey SteveG,

Could you please try learning other remote to know if just work at a distance of more than 3 or 4 feet too.
If no, so maybe your OSD remote issue, If Yes, I guess your OSD recept issue. And please connect to Neuros support.

Recording on CF, MMC, USB on 3.25-0.23 will be more stable.

Yes, SD card is still unstable on 3.25-0.23. This is in to-do list. And I guess this will be resolve soon

njk,
Appreciate for your help.  It is one SW issue from your terminal information.  Neuros will try to fix on version ??-0.24.
Thanks again.

3.25-0.23 firmware should fix many issue, it should include clock issue

Hi Hal900, njk,  fstolze, jrog, I guess your OSD issues are caused by SW, please update to 3.25-0.23 and make sure Ethernet setting is DHCP or Statics IP is right value , such as 192.168.1.100 , before ethernet plugged in. Thanks.

NeuroTom, after update to 3.25-0.23, the symptom is same 3.20-0.20? I means OSD is loading codec when reboot?
 roleeper, mfm1996, I can't make sure what happened on your OSD. Could you give more detailed here, such as what status OSD is when rebooting, what is OSD'S interface or menu when rebooting? Thanks.

Guys, could anyone capture terminal information from OSD serial interface when issue exist? Can you get me by email: sweng at neuros dot com dot cn. Thanks again.

Thank Greyback's response.
You can know more from http://wiki.neurostechnology.com/theneuros/index.php/OSD_Developer_Board_v1

I guess USB will more strong next release.

Here has more related topic.
http://forums.neurostechnology.com/smf/index.php?topic=7532.0

 OSD will take about one minute to enter recording from power off

 out of sync issue, you can see the detail information on : http://bugzilla.neurostechnology.com/show_bug.cgi?id=609

Recording out of sync issue, you can see the detail information on : http://bugzilla.neurostechnology.com/show_bug.cgi?id=609

Hal9000,
3.20-0.20 seem to have this bug when loading "Loading mpeg4sp_g7xx codec" , but it is hard to meet. Neuros will fix it.

I guess other issues, maybe cause since power wall, please sure power cable has been plug in completely. Thanks